POWER+: INTEGRAL LIQUID WATERPROOFING CHEMICAL
APPLICATION AREA:
- Waterproofing of concrete and sand-cement mortars used in Basements
- Roof slabs and screeds
- Water tanks & water retaining structures
- External plastering
- Bathrooms and balconies
- Sumps and drains
APPLICATION PROCEDURE:
- Charge cement & aggregates to concrete mixer as per the mix design, mix in dry state
for 1–2 minutes
- Start addition of 75–80% mixing water & mix for 2-3 minutes
- POWER is added as per the recommended dosage into the remaining mixing / gauging
water, then add to concrete mixer & mix for another 2 minutes
- Place the concrete or apply plaster, as needed.
- Cure the applied mortar or concrete as per good construction practices.
ADVANTAGES:
- Corrosion resistant - Makes concrete more cohesive, hence protects steel better
against corrosion
- Compatibility – Being a liquid, easily dispersible & compatible with concrete/mortar
mixes.
- Permeability – It reduces the permeability of water into concrete
- Strength – The setting time and compressive strength of the concrete remains within
the specification limits
- Shrinkage – Reduces shrinkage crack development in plaster & concrete
- Workability – Improves workability of freshly mixed cement concrete
- Durability – Increases durability by improving waterproofing of concrete
PROPERTIES:
| Apperance |
Free flowing liquid |
| Colour |
Yellow |
| Sp. gr. @ 250C |
1.02-1.04 @ 27 C |
| Non volatile content |
13.5 - 14.5% |
| pH value |
9- 13 |
| Compressive strength N /mm^2 |
As per the standard |
| Air Entrainment |
Less than 0.5% |
PACK SIZE:
- SHELF LIFE 12 MONTHS:500 ml, 1 ltr, 5 ltr, 20 ltr, 225 ltr
